User guide

53
Enable 802.1x
Authentication
Enable or disable the use of 802.1x user
authentication.
RADIUS Server
IP Address
Enter the IP address of the RADIUS
authentication server here.
RADIUS Server
Port
Enter the port number of the RADIUS
authentication server here. Default value is
1812.
RADIUS Server
Password
Enter the password of the RADIUS
authentication server here.
Click “APPLY” to save changes. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you
to make further changes in the browser-based management interface, before
applying them all at once.
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.
III-5-3. WEP
WEP (Wired Equivalent Privacy) is a simple encryption type. For a higher level
of security, please consider using WPA encryption if possible.
Note: Most wireless devices support WPA
encryption, though some legacy wireless
devices only support WEP encryption.
WEP only supports up to 54Mbps
transmission data rate.