User guide

59
Click “APPLY” to restart the device and implement any changes. The device will
restart itself.
III-7. System Utility
In “System Utility” you can configure basic system and
administrative parameters.
On the main screen on the right there are 3 categories
you can configure, Password Settings, Management IP
and DHCP Server.
III-7-1. Password Settings
You can change the password used to login to the
browser-based configuration interface here. It is advised
to do so for security purposes.
Current
Password
Enter your current password. The default
password is 1234.
New Password
Enter your desired new password here. You
can use any combination of letters, numbers
and symbols up to 20 characters.
Re-Enter
Password
Confirm your new password.
Click “APPLY” to save changes. The following message will appear:
Click “CONTINUE” to save the changes but not apply them yet. This allows you