User guide

6
(LAN Ports 1 to 5)
Flashing
Data is being transmitted
through the Ethernet cable
Off
No connection
Back panel:
a. Antenna Connector
Connect the included 3dBi antenna here. It is a round connector (standard
reverse SMA).
b. 10/100M LAN Ports
Connect wired computers or other network devices to these ports..
c. 5V DC
Connect the included power adapter here.
d. WPS/Reset Button
Press this button and hold for 20 seconds to reset the access point to
factory default settings. Press this button for less than 5 seconds to start
WPS functions.
Product Label
The product label on the underside of the device displays the default IP
address, username and password of the access point.
a.
b.
c.
d.