User guide

64
Reset/WPS button for 10 seconds, until the
Power LED ( ) goes out. The Reset/WPS
button is located on the front panel of the
device.
III-9. Upgrade
The access point’s upgrade feature allows you to update
the system firmware to a more recent version. You can
download the latest firmware from the Edimax website.
Selecting “Upgrade” from the menu on the left side will
bring you to the following screen.
Click on the browse button to open a window and locate the downloaded
firmware file. Confirm your selection and click “APPLY”. A firmware upgrade
may take several minutes. The following message will appear:
Note: Do not turn off or disconnect the access
point during a firmware upgrade, as this could
damage the device.
Note: It is recommended that you use a wired
Ethernet connection to upload the firmware
file.