Network Card User Manual

54
0: FCC (US, Canada, and other countries uses FCC radio
communication standards)
1: ETSI (Europe)
2: SPAIN
3: FRANCE
4: MKK
5: MKKI (TELEC)
6: ISERAL (Channel 3 to 9)
7: ISERAL (Channel 5 to 13)
Please note that only change the country code if you
are in different country. For example: when
operating this product in US, only channels 1~11 can
be operated. Selection of other channels is not
permitted under FCC regulations.
No forwarding
among wireless
clients
Check this box and wireless clients will not be able to share data
with each other.
Hide SSID
Check this box and the SSID will not be broadcasted to the public.
Your wireless clients must know the exact SSID to be able to
connect to your computer. This option is useful to enhance
security level.
Allow BW 40 MHz Check this box to allow BW 40MHz capability.
TX BURST
Check this box to accelerate the data transmit rate. It may not
work with all wireless access point and wireless devices.
Beacon(ms)
You can define the time interval that a beacon signal should be
send. Default value is 100. Do not modify this value unless you
know what will be affected.
TX Power
You can select the wireless output power here. Please select a
proper output power setting according to your actual needs. You
may not need 100% of output power if other wireless clients are
not far from you.
Idle Time
Select the idle time for the wireless access point. Default value is
300. Do not modify this value unless you know what will be
affected.
To save changes, click ‘Apply button. Or you can click ‘Default’ to reset all values to factory
default value.