- Edimax Multi-Homing Broadband Router User Manual

Password

Enter the Password provided by your ISP for the PPTP

connection

PPTP Gateway

If your LAN has a PPTP gateway, then enter that PPTP gateway

IP address here. If you do not have a PPTP gateway then enter

the ISP’s Gateway IP address above

Connection ID This is the ID given by ISP. This is optional.

MTU

This is optional. You can specify the maximum size of your

transmission packet to the Internet. Leave it as it is if you to not

wish to set a maximum packet size.

BEZEQ-ISRAEL Select this item if you are using the service provided by

BEZEQ in Israel.

Connection Type If you select “Continuous”, the router will always connect

to the ISP. If the WAN line breaks down and links again,

the router will auto-reconnect to the ISP.

If you select “Connect On Demand”, the router will auto-

connect to the ISP when someone want to use the Internet

and keep connected until the WAN idle timeout. The router

will close the WAN connection if the time period that no

one is using the Internet exceeds the “Idle Time”.

If you select “Manual”, the router will connect to ISP only

when you click “Connect” manually from the Web user

interface. The WAN connection will not disconnected due

to the idle timeout. If the WAN line breaks down and latter

links again, the router will not auto-connect to the ISP.

Idle Time You can

specify an idle time threshold (minutes) for the WAN

port. This means if no packets have been sent (no one using the

Internet) throughout this specified period, then the router will

automatically disconnect the connection with your ISP.

Note: The WAN "idle timeout" auto-disconnect function may not

work due to abnormal activities of some network application

software, computer virus or hacker attacks from the Internet. For

example, some software sends network packets to the Internet in

the background, even when you are not using the Internet. This

function also may not work with some ISP. So please make sure

this function can work properly when you use this function in the

first time, especially your ISP charge you by time used. Due to

the many uncontrollable issues, we do not guarantee the WAN

"idle timeout" auto-disconnect function will always work. In order

to prevent from extra fee charged by ISP, please TURN OFF

THE ROUTER WHEN YOU FINISHED USING THE INTERNET.