- Edimax Multi-Homing Broadband Router User Manual

2.2 WAN

This section allows you to select the connection method in order

to establish a connection with your ISP (same as the Quick

Setup Wizard section)

2.3 LAN You can specify the LAN segment’s IP address, subnet Mask,

enable/disable DHCP and select an IP range for your LAN

2.4 NAT

You can configure the Address Mapping, Virtual Server and

Special Applications functions in this section. This allows you to

specify what user/packet can pass your router’s NAT.

2.5 Firewall

The Firewall section allows you to configure Access Control,

Hacker Prevention and DMZ.

Select one of the above five General Setup selections and proceed to the manual’s relevant sub-

section

2.1 System

The system screen allows you to specify a time zone, to change the system password and to

specify a remote management user for the broadband router.