- Edimax Multi-Homing Broadband Router User Manual

Parameters Description

Enable/Disable QoS You can check “Enable QoS” to enable QoS

function for the WAN port. You also can uncheck

“Enable QoS” to disable QoS function for the

WAN port.

Add a QoS rule into the table Click “Add” then you will enter a form of the QoS

rule. Click “Apply” after filling out the form and

the rule will be added into the table.

Remove QoS rules from the table If you want to remove some QoS rules from the

table, select the QoS rules you want to remove

in the table and then click "Delete Selected". If

you want remove all QoS rules from the table,

just click "Delete All" button. Click "Reset" will

clear your current selections.

Edit a QoS rule Select the rule you want to edit and click “Edit”,

then you will enter the detail form of the QoS

rule. Click “Apply” after editing the form and the

rule will be saved.

Adjust QoS rule priority You can select the rule and click “Move Up” to

make its priority higher. You also can select the