- Edimax Multi-Homing Broadband Router User Manual

2.4.5 Protocol and Port Binding

Protocol and Port Binding let you manually bind an application to a WAN port. Only

packets that match all the entered criteria will be bound to the assigned WAN port. You

can have to fill all the items. The items that you leave blank will be ignored.

Parameters Description

Enable Protocol & Port Binding The “Protocol and Port Binding” function is default disabled. You

can select to enable the “Protocol and Port Binding” function.

Source IP Range Only packets with this assigned source IP range will statically

bind to the assigned WAN port. If you assign 192.168.2.3 –

192.168.2.5, it means 3 IP addresses: 192.168.2.3, 192.168.2.4

and 192.168.2.5

Destination IP Range Only packets with this assigned destination IP range will

statically bind to the assigned WAN port. If you assign

192.168.2.3 – 192.168.2.5, it means 3 IP addresses: 192.168.2.3,

192.168.2.4 and 192.168.2.5

Source Port Range Only packets with this assigned source port range will statically

bind to the assigned WAN port.

Destination Port Range Only packets with this assigned destination port range will

statically bind to the assigned WAN port.