- Edimax Multi-Homing Broadband Router User Manual

2.4.6 ALG Settings

You can select applications that need “Application Layer Gateway” to support.

Parameters Default Description

Enable You can select to enable “Application Layer

Gateway”, then the router will let that

application correctly pass though the NAT

gateway.

Click <Apply> at the bottom of the screen to save the above configurations. You can now

configure other advance sections or start using the router (with the advance settings in place)

2.4.7 Static Routing

This router provides Static Routing function when NAT is disabled. With Static Routing,

the router can forward packets according to your routing rules.

Note: The DMZ function of firewall will not work if static routing is enabled.