- Edimax Multi-Homing Broadband Router User Manual

Client PC IP Address
Enter the IP address that you wish to apply this Access
Control rule. This is the user’s IP address that you wish
to setup an Access Control rule.
Note: You need to give your LAN PC clients a
fixed/static IP address for the Access Control rule to
work properly.
Client PC Service You can block the clients from accessing some
Internet services by checking the services you want
to block.
Protocol This allows you to select UDP, TCP or both
protocol type you want to block.
Port Range You can assign up to five port ranges. The router
will block clients from accessing Internet services
that use these ports.
Apply Changes Click “Apply Changes” to save the setting.
Reset Click “Reset” to clear all fields.
Click <Apply Changes> at the bottom of the screen to save the above configurations. You can
now configure other advance sections or start using the router (with the advance settings in place)
65