- Edimax Multi-Homing Broadband Router User Manual

Client PC IP Address

Input the IP address of a particular host in your LAN that will

receive all the packets originally going to the WAN port/Public IP

address above

Note: You need to give your LAN PC clients a fixed/static IP

address for DMZ to work properly.

Add DMZ Fill in the "WAN Port", "Public IP Address” and “Client IP

Address” of the DMZ to be added and then click "Add".

Then this DMZ entry will be added into the "DMZ Table"

below. If you find any typo before adding it and want to

retype again, just click "Clear" and the fields will be cleared.

Remove DMZ If you want to remove some DMZ from the "DMZ Table",

select the DMZ entries you want to remove in the table and

then click "Delete Selected". If you want remove all DMZ

entries from the table, just click "Delete All" button. Click

"Reset" will clear your current selections.

You can now configure other advance sections or start using the router (with the advance settings

in place)