User manual

15
Scan results will be displayed here, please check if the wireless device
(access point or another computer) with the SSID you wish to connect is
shown here.
Scan result includes 6 types of information, they are:
A The SSID (Service Set Identifier) of wireless device. If nothing is displayed here, it
means the SSID of this wireless device is hidden.
If a symbol appears in front of the name of wireless device, means you’ve
established connected with that wireless device.
B The type of this wireless device and the channel number of this wireless device.
Means this wireless device is an access point
Means this wireless device is a computer (Ad-Hoc mode, point-to-point
connection)
C The wireless standard supported by this access point.
‘n’ for 802.11n
, ‘g; for 802.11g , and ‘b’ for 802.11b .
WPS icon will appear when the access point supports WPS. If the
access point uses encryption, a key icon
will appear.
Note: When the access point supports WPS and WPS icon
is appeared, you will not
see the key icon here even through the access point uses encryption.
D Shows the signal strength of access point by percentage.
E Shows the bar graph of the signal strength.
A B C D E