User manual

2-7-3 WPS Setup - PIN

If the wireless access point you wish to connect supports PIN, please follow the following

instructions to establish connection to it:

1. Right-click the Edimax configuration utility icon located at lower-right corner of computer

desktop and then click ‘Launch Config Utility’.

2. Click ‘WPS Configuration’ menu, and the following settings will appear.

3. The PIN code of your wireless network card is an eight-digit number located at the

upper-right position of configuration utility. Remember it, and input the number to your

wireless access point as the WPS PIN code (Please refer to the user manual of your

wireless access point for instructions about how to do this).

NOTE: If you experienced problem with the pin code provided here,

you can click ‘Renew’ to get a new pin code.