Copyright Copyright © Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Multi-Language QIG on the CD Český Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači. Deutsch Auf der beiliegend Treiber CD finden Sie deutsche Anleitung zur Schnellinstallation. Español Incluido en el CD el G.R.I. en Español. Français Veuillez trouver l’français G.I.R ci-joint dans le CD. Italiano Incluso nel CD il Q.I.G. in Italiano. Magyar A magyar telepítési útmutató megtalálható a mellékelt CD-n. Nederlands De nederlandse Q.I.G.
Thank you for purchasing this wireless projector server! This wireless projector server supports both Windows and Mac OS. If your projector server does not work with Mac OS, please download the latest firmware at www.edimax.com. Before you start using this product, please check if there is anything missing in the package, and contact your dealer to claim the missing item(s): Packaging List Item No.
Front Name Description PWR Switches this projector server on and off WPS WPS (Wi-Fi Protected Setup) activation button Remote control receiver IR signal receiver (for the remote control) PWR LED Indicates whether this wireless projector server is on LAN LED Indicates whether a LAN device is connected WLAN LED Indicates whether there is wireless LAN activity USB AF port Connects keyboard / mouse USB BF port Connects a computer to the projector server to display the contents of the computer
Back Name Description 12VDC Connects to the supplied power adapter Reset Press and hold this button for 5 seconds to reset the projector server to factory defaults Antennas (left and right) VGA Audio Output LAN External IR For wireless signal transmission Connects to any VGA-compatible display Connects to speakers or an audio amplifier 10/100/1000Mbps Ethernet port Connects to an IR extender cable 6
Remote Control Battery cover Name Black out Menu Description Press this button to black out the contents on the external display; press this button again to resume Switches between a computer‟s display content and the configuration menu Page down Equivalent to the “Left” key on a computer‟s keyboard Page up Equivalent to the “Right” key on a computer‟s keyboard Prev.
Projector Server Setup If you plan on putting the projector server on a desk or other horizontal surfaces, stick the foot pads on the 4 locations as indicated is the picture. Skip this step if you plan on hanging the projector server on the wall. Connect the Ethernet cable to the LAN port (this port is labeled as “LAN” and is located at the back of this projector server). Connect the projector server to an amplifier or a set of speakers via the audio port.
Connect the projector server to a video display via the VGA connector. Adjust the antennas so they are perpendicular to the ground.
Insert the power connector into the “12V” socket at the back of the projector server. Press the “Power” button located at the front of the projector server. Check the “Power” LED. If it is not on, refer to the “Troubleshooting” section in the user manual.
Using the Projector Server Press the “Power” button at the front of the projector server. You should be able to see this image on the screen. Please wait for about 60 seconds for the projector server to start up. Projector server will acquire an IP address from the DHCP server on your LAN automatically, and the IP address will be displayed at the bottom-left corner of the display of attached projector or monitor. If there‟s no DHCP server on your LAN, projector server will use „192.168.2.
Connecting to the projector server wirelessly: Search for the projector server‟s SSID and establish a connection. Then open your browser and key in the WLAN IP address. (SSID: Edimax Projector) (IP address: 192.168.100.10) Connecting to the projector server via Ethernet: If you wish to connect to the WP-S1300 via an Ethernet cable, please refer to chapter 2-3 of the manual to set up an IP address for the computer first. (Wired IP address: 192.168.2.
When you are prompted to download the software, click “Run”. Click “Run” to start software installation. If you see this message, click „Unblock‟. (You must click „Unblock‟ or client utility will become unusable).
When the installation is complete, an icon named “WPS” will appear on your computer‟s desktop: The client software will search for the projector server connected to your local area network, and the projector server‟s SSID will be displayed in the “Projector SSID” field. Enter a user name (can be anything that allows others to identify you), and the login code displayed on the screen. The projector server will obtain your user name from your computer automatically.
To stop presentation, click „ button. Note: Please refer to the user manual in the CD-ROM for more detailed information on Internet connection type and other settings.
Declaration of Conformity We, Edimax Technology Co., LTD., declare under our sole responsibility, that the equipment described below complies with the requirements of the European R&TTE directive (2006/95/EC). Equipment Model No. : : Wireless 802.11b/g/n Projector Server WP-S1300 The following European standards for essential requirements have been followed: Spectrum EMC : : ETSI EN 300 328 V1.7.1(2006-10) EN 301 489-1 V1.8.1(2008-4) EN 301 489-17 V2.1.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
