User manual

66
VI-5-2. MAC Filtering
The MAC filtering feature allows you to define a list of wireless devices
permitted to connect to this access point, identified by their unique MAC
address. When this feature is enabled, devices which are not on the list of
permitted MAC addresses cannot connect to the access point.
MAC address entries will be listed in the “MAC Address Filtering Table”. Select
an entry using the “Select” checkbox.
Delete Selected/
Delete All
Delete selected or all entries from the table.
Reset
De-select all selected entries.
To enable the MAC filtering function, check the box labeled “Enable Wireless
Access Control”.
MAC address
Enter a MAC address of computer or network
device without dashes or colons e.g. for MAC
address ‘aa-bb-cc-dd-ee-ff’ enter
‘aabbccddeeff’.
Comment
Enter a comment for reference/identification
consisting of up to 16 alphanumerical
characters.
Add
Click “Add” to add the MAC address to the