Multi-Languages QIG on the CD Český Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači. Deutsch Auf der beiliegend Treiber CD finden Sie deutsche Anleitung zur Schnellinstallation. Español Incluido en el CD el G.R.I. en Español. Français Veuillez trouver l’français G.I.R ci-joint dans le CD. Italiano Incluso nel CD il Q.I.G. in Italiano. Magyar A magyar telepítési útmutató megtalálható a mellékelt CD-n. Nederlands Polski Português De nederlandse Q.I.G.
1 Product Introduction .............................................................................. 4 1-1 Package Contents ........................................................................ 5 1-2 Front Panel .................................................................................. 5 1-3 Back Panel ................................................................................... 6 2 Network Setup .......................................................................................
English Copyright© by Edimax Technology Co, LTD. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of this Company .
1 Product Introduction Thank you for purchasing Edimax 3G-6200n / 3G-6400n wireless 3G broadband router! This high cost-efficiency router is the best choice for Mobile / Small office / Home office users, all computers and network devices can share a single wireless 3G modem or xDSL / cable** modem internet connection at high speed. Easy install procedures allows any computer users to setup a network environment in very short time - within minutes, even inexperienced.
1-1 Package Contents Before you starting to use this router, please check if there’s anything missing in the package, and contact your dealer of purchase to claim for missing items： □ 3G Broadband router (main body, 1 pcs) □ Quick installation guide (1 pcs) □ One CD-ROM (Including the Setup Wizard, Multi-languages Quick Installation Guide and User Manual) □ 12V power adapter (1 pcs) □ Ethernet Cable (1 pcs) □ Holding Base (1 pcs) □ Accessories 1-2 Front Panel 3G-6200n / 3G-6400n LED PWR WAN LNK/ACT Light
1-3 Back Panel 3G-6400n 3G-6200n Item Name Power Reset / WPS Description Power connector, connects to power adapter Reset the router to factory default settings (clear all settings) or start WPS function. (a) Press this button and hold for 20 seconds to clear all settings. (b) Press this button for 2 ~ 5 seconds to start WPS function. 1–4 The router’s 4 LAN ports are where you connect your LAN’s PCs, printer servers, hubs and switches etc.
2 Network Setup 2-1 Hardware Installation: Instructions for using the router to share the Internet with multiple PCs. (Power on the Modem and the Router.) (A) 3G/3.5G Modem card installation: If you have 3G/3.5G modem card and SIM card, please follow the following instructions to establish connection 1. Connect power adapter to 3G-6200n / 3G-6400n 2. Connect another Ethernet cable from the any LAN ports (1~4) on router to the Ethernet socket on the PC 3. Insert SIM card into 3G/3.
(B) Cabling installation: If you do not have 3G USB modem. You can also access Internet by xDSL/Cable modem, please follow the following instructions: 1. Connect the Ethernet cable from the router’s WAN port to the LAN port of the modem. 2. Connect another Ethernet cable from the any LAN ports (1~4) on router to the Ethernet socket on the PC. 3. Check to make sure the router’s LINK LED is lit; to confirm the cable connections are made correctly.
2-2 PC LAN IP Configuration Configure the PC LAN setting to automatically obtain an IP address from the router by following the below steps. z Click “Start” in the task bar then select the “Control Panel” . z Click “Switch to Classic View” on the left top to see more setting icons.
z z z Find an icon “Network Connection” then Double-Click to open the network connection setting. You will see an icon “Local Area Connection”, select the icon then Right-Click the mouse to open the sub-menu and select the “Properties” .
z Ensure the parameter marked in blue are checked in “Obtain an IP address automatically” and “Obtain DNS server address automatically” then press “OK” to close.
2-3 Internet Configuration 3G-6200n / 3G-6400n provides two types of Internet connection method: wireless (3G/3.5G USB modem) or wired (xDSL / cable modem) connection. You can access internet via USB 3G/3.5G modem card, or via wired xDSL / cable modem connection. However, only one connection method (wireless or wired) can be used at the same time. Related instructions will be given as follow. 2-3-1 Wireless 3G/3.5G Setup 3G-6200n / 3G-6400n supports most of 3G/3.
can use the web browser to access Internet. ( B ) PIN code or user name / password required: If you still can’t access Internet, please enter the router’s default IP address: “192.168.2.1” into your PC’s web browser and press “enter” The login screen below will appear. Enter the “User Name” and “Password” and click “OK” to login.
The main page will appear, click “Quick Setup” to setup the Internet connection. Select ‘(GMT) Greenwich Mean Time: (your country or city) then Click “Next” button. Please check the authentication method you want to use. Most of telecomm service providers require you to input PIN Code, please input the PIN code provided by telecomm service provider.
Please input User name & Password in “PPP Settings” and do not input them in “Network Settings” unless your ISP ask you input them in both. Note: Please choose “CDMA”, if your ISP use 3G CDMA system. ( C ) Driver / Utility required on PC side Some 3G/3.5G modem card does not work with instructions (A) or (B) listed above (ex. BandLuxe C100S). You need to install 3G/3.
every PC which needs to access Internet first. After driver / utility installation is complete, every PC will be able to access Internet via 3G/6200n / 3G-6400n. 1. Plug in the BandLuxe C100S modem card to the USB port of your computer. 2. The system will detect the hardware of C100S USB adapter and also the storage inside the adapter. 3. Please click “Cancel” to ignore the message of the found new hardware wizard.
4. Please go to “My computer”, you will see the BandLuxe C100S. Double click the device. 5. The program inside the adapter will prepare to install the driver and utility of the adapter.
6. Click “Next”. 7. Select “I accept the terms in the license agreement” and click “Next”.
8. If you want to change the destination folder, please click “Change”. Click “Next” to continue. 9. Click “install”.
10. The system is installing the driver and utility of the adapter. 11. Install successfully, click “Finish” to close the install wizard.
12. The utility of C100S will start up automaticity. Please select the “MENU” 13. Click “Setting”. 14. Select the “Auto connect on startup”.
15. Plug in the C100S into the USB port of the 3G router. 16. The USB adapter will get the IP address from ISP automatically. You can check the Status of the 3G-6200n / 3G-6400n on the Web site (ex: 192.168.2.1). 17. Now you are able to connect to Internet successfully.
Note : If your SIM card requires entering the PIN code, please enter into the web management of the 3G router. In WAN setting web page, select 3G/3.5G. Enter the PIN code of the adapter.
2-3-2 Router Configuration – PPPoE Note: Please do not run the PPPoE software; otherwise the Internet connection for the router may fail. The following instruction will help you to get connected if you have xDSL / cable Internet connection Please enter the router’s default IP address: “192.168.2.1” into your PC’s web browser and press “enter” The login screen below will appear. Enter the “User Name” and “Password” and click “OK” to login.
1. Select “PPPoE xDSL”, the system will move into next step 2. Enter the “User Name” and “Password” that ISP provided and leave the others. (The “Service Name” can be blank) and click “OK” to save the setting then reboot the router 3. After reboot, your router is now ready for Internet connection.
2-3-3 Router Configuration – DHCP( Dynamic IP or Cable Modem) Please enter the router’s default IP address: “192.168.2.1” into your PC’s web browser and press “enter” The login screen below will appear. Enter the “User Name” and “Password” and click “OK” to login.
1. Select “Cable Modem”, the system will move into next step 2. Enter ”Host Name” and “MAC Address”. (The “Host Name” can be blank) The MAC Address is provided by ISP (e.g. NTL) or click “Clone Mac Address” button if you’re using the computer’s MAC Address. Confirm with your ISP about MAC Address used, Click “OK” button to save the settings then reboot the router. 3. After reboot, your router is now ready for Internet connection.
3 Advanced Setup 3-1 Change management password Default password of this router is 1234, and it’s displayed on the login prompt when accessed from web browser. There’s a security risk if you don’t change the default password, since everyone can see it.
3-2 Firmware Upgrade The system software used by this router is called as ‘firmware’, just like any applications on your computer, when you replace the old application with a new one, your computer will be equipped with new function. You can also use this firmware upgrade function to add new functions to your router, even fix the bugs of this router.
firmware upgrade procedure automatically. The procedure may take several minutes, please be patient. NOTE: Never interrupt the upgrade procedure by closing the web browser or physically disconnect your computer from router. If the firmware you uploaded is corrupt, the firmware upgrade will fail, and you may have to return this router to the dealer of purchase to ask for help. (Warranty voids if you interrupted the upgrade procedure).
3-4 Wireless Setup SSID is the name of the wireless router. You may change your SSID to a meaningful name so that you can identify your wireless router from others. You can use any alphanumeric characters, up to 32 characters. By default the ESSID is ‘default’. It’s very important to set wireless security settings properly! If you don’t, hackers and malicious users can reach your network and valuable data without your consent and this will cause serious security problem.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
