User`s manual

83
2.7.6 Static Routing
This router provides static routing function when NAT is disabled. With
static routing, the router can forward packets according to your routing
rules. The IP sharing function will not work any more in static routing
mode.
Note: The DMZ function of firewall will not work if static routing is
enabled.
Parameters Description
Enable Static
Routing
Static routing function is disabled by default. You have
to enable the static routing function, to make your
routing rules take effect.
Destination
LAN IP
The network address of destination LAN.
Subnet Mask The subnet mask of destination LAN.
Default The next stop gateway of the path toward the