User`s manual

decide the behavior of MAC filtering table. If you

select deny, all MAC addresses listed in filtering

table will be denied from connecting to the

network; if you select allow, only MAC addresses

listed in filtering table will be able to connect to the

network, and rejecting all other network devices.

Client PC MAC address Please input the MAC address of computer or

network device here, dash ( - ) or colon ( : ) are

not required. (i.e. If the MAC address label of your

wireless device indicates ‘aa-bb-cc-dd-ee-ff’ or

‘aa:bb:cc:dd:ee:ff’, just input ‘aabbccddeeff’

Computer Name All computer names found by this broadband

router on local network will be listed here. You can

select the computer name and click ‘<<’ button to

add selected computer’s IP address to ‘Private IP’

field.

Please note that this list may not be able to list all

computers on your local network.

Comment You can input any text here as the comment of

this MAC address, like ‘ROOM 2A Computer’ or

anything. You can input up to 16 alphanumerical

characters here. This is optional and you can

leave it blank, however, it’s recommended to use

this field to write a comment for every MAC

addresses as a memory aid.

Add Click ‘Add’ button to add the MAC address and

associated comment to the MAC address filtering

table.

Reset Remove all inputted values.

All MAC address entries will be listed in this page: