User manual

10
Parameter Description
Desired Rate There are several options including
Automatic/1/2/5.5/11/6/9/12/18/24/36/48/54Mbps for you to select. When
the “Automatic” is selected, the device will choose the most suitable
transmission rate automatically. The higher data rate you designated in
the network, the shorter distance is allowed between the card and the
wireless stations.
When the network type is in Ad Hoc mode, the maximum data rate is
11Mbps (11b) so that there are only “Automatic/1/2/5.5/11Mbps” options
you can select. If you want to enable the data rate up to 54Mbps (11g),
please follow steps listed below.
1. Go to “Network Connections”.
2. Right Click the “Wireless Network Connection” and select
“Properties”.
3. From the pop-up screen, press “Configure” button.
4. Enter into “Advanced” page of the “Properties” screen.
5. Change the setting of “Ad Hoc Operational Mode” from “Wi-Fi 802.11g
Mode” to “IEEE 802.11g Mode”.
Encryption
Parameter Description
Encryption Mode None – Disable the WEP Data Encryption.
WEP – Enable the WEP Data Encryption. When the item is selected, you
have to continue setting the WEP Key Length and the encryption keys.