Quick Installation Guide

24
IV. Reset to Factory Default Settings
If you experience problems with the device, try rebooting it by reconnecting
the power. If rebooting does not work, try resetting it back to its factory
default settings. This resets all settings back to the default settings.
To perform a factory reset, please follow steps below:
1. Press and hold the center button (indicated in the picture below) for at
least 10 seconds until System Status LED shows up Red light. After that,
you can release it.
2. Please wait for at least 15 seconds for the device to reset.
System Status LED:
Red Lights (flashing rapidly): If the LED is Red and is flashing rapidly, then that
is the sign of factory reset.
Red Lights (flashing slowly): If the LED is Red and is flashing slowly, then it
means the AirBox is restored to factory.
The device would not reset if you try factory resetting it after 3 minutes
of reconnecting power. Please try within 3 minutes of reconnecting
power.