AI-1001W V2/V3 Installation Guide 09-2018 / v1.
Content I Installation Reminder / Safety Guide ..................................................... 1 II Cleaning the Unit .................................................................................. 2 II-1 II-2 Air Pump Cleaner........................................................................................... 2 Dust-off Canned Compressed Air .................................................................. 3 III Product Information .......................................................
I Installation Reminder / Safety Guide For effective sensing and retrieval of environmental data, please install the unit in semi-outdoor spaces with certain safety restrictions outlined below: Must be in locations with good air circulation. Must be vertically positioned for proper air intake to achieve cross ventilation. The air inlet must be kept clear and should be rechecked regularly.
II Cleaning the Unit Choose either of the two options below depending on the cleaning tool you have. If you have other pump-like cleaning tools available (e.g. for computers), you may also utilize them. Please be careful to not exert extremes of force or temperature / humidity onto the sensors to prevent damaging them. It is recommended to clean the sensors every 3-6 months for maximum sensor functionality.
II-2 Dust-off Canned Compressed Air A general dust-off compressed air will be sufficient. 1. Direct the nozzle of the compressed air at an opening (Figure 5 or Figure 6) of a sensor. 2. 3. Keep the nozzle at 10cm from the sensor opening. 4. Make sure all sensor openings are cleaned. Use short bursts (1-2 seconds) of air spray a few times to clean the sensor. Figure 5a. AI-1001W V2 Figure 6a. AI-1001W V2 Figure 3b. AI-1001W V3 Figure 4b.
III Product Information III-1 Package Content AI-1001W V2/V3 USB Cable Quick Installation Guide CD with User Manual Cable Ties Screws (V2 only) Power Adapter Mounting Bracket (V3 only) III-2 LED Indicator LED Status Wi-Fi Internet All LED (Power) Color LED Status Description On Red Flashing Green AI-1001W V2/V3 setup completed On AI-1001W V2/V3 Wi-Fi connected On Flashing Off AI-1001W V2/V3 is waiting for setup Off Flashing Green AI-1001W V2/V3 is booting up AI-1001W V2/V3 Wi-Fi ac
IV Installation This section will guide you through the steps to connect your AI-1001W V2/V3 to the Internet. IV-1 Downloading the App 1. Search and download "EdiGreen" in Apple App Store or Google Play. Alternatively, scan the QR code below (choose your device's OS correctly). iOS Android IV-2 Site Survey Before deploying your AI-1001W V2/V3, please do a site survey on the Internet Wi-Fi signal at the desired deployment location.
IV-2-1 Android OS 1. Please bring your android smart device to the desired deployment location. 2. Go to the Wi-Fi page on your android device (e.g. Settings Wi-Fi). 3. Please find your desired Wi-Fi connection and check the signal strength icon. If the icon displays 2 bars or more signal strength, please go to the next section. If the icon displays 1 bar or no signal strength, please consider changing the desired deployment location and go through the steps outlined in this section again.
IV-2-2 iOS 1. Please bring your iOS smart device to the desired deployment location. 2. Go to the Wi-Fi page on your iOS device (e.g. Settings Wi-Fi). 3. Please find your desired Wi-Fi connection and check the signal strength icon. If the icon displays 2 bars or more signal strength, please go to the next section. If the icon displays 1 bar or no signal strength, please consider changing the desired deployment location and go through the steps outlined in this section again.
IV-3 Connecting AI-1001W V2/V3 to the Internet Please make sure… A. "Access to my location" is turned on. B. Your mobile device is able to connect to your home's Wi-Fi network (such as the "test" network shown on the right) or whichever network you anticipated the device to connect to. Please make sure this network has internet connectivity. 1. Please plug the power adapter to a power socket and connect the AI-1001W V2/V3 (demonstrated on the left) using the USB cable. The red status LED will turn on. 2.
3. For iOS users, go to your iPhone’s Wi-Fi settings and connect to your AI-1001W V2/V3’s SSID (PM2.5_Setup_**). The last two characters are unique to your device. Open the EdiGreen app and continue at Step 6. 4. Android users open the EdiGreen app and a privacy statement will be displayed (This privacy statement appears once only when EdiGreen is opened for the first time), tap “YES” to continue and tap the icon in the top right corner of the screen.
5. Select Add New Device and select your AI-1001W V2/V3 (PM2.5_Setup_**), from the Available wireless device list. The last two characters are unique to your device. 6. The app will prompt you to enter a new device name and password for better security. Tap the > icon to continue. After setup, you can use this new name and password to login, including from a second device.
7. Select your Wi-Fi network from the list and, where applicable, enter the Wi-Fi password. Tap the > icon to complete setup. If you cannot find the desired Wi-Fi network SSID, tap to refresh network list. If you are still unable to find the desired network due to complex Wi-Fi network environment, try manual connect by tapping "Connect to a hidden network", select the security type and, where applicable, enter the password. 8. Setup is complete.
You can also connect to your device on a second Wi-Fi device. Just download the app and add it in the same way. If you’re connected to a different Wi-Fi network, then select “Add one manually” and input the MAC address printed on the AI-1001W V2/V3 label. V Reset to Factory Default Settings If you experience problems with the AI-1001W V2/V3, try rebooting the AI-1001W V2/V3 by reconnecting the power. If rebooting does not work, try resetting it back to its factory default settings.
VI Replace PM 2.5 Sensor 1. Disconnect the AI-1001W V3 from power and remove it from the wall-mound stand. Then unplug the power adaptor before cleaning moderately. 2. Remove the bottom screws. 3. Carefully pull out the PM2.5 sensor. 4. After the ribbon cable is removed, take off the existing sensor and replace with the new one. Then install the new sensor in accordance with installation guideline stated above.
From this viewing angle, the cable color orientation is Purple, Orange, White, Blue, Green, Yellow, Brown, Red (Insert the ribbon cable from its tip) VII Wall-Mount Stand Installation The installation of wall-mount stand for AI-1001W V3 is shown as figure below: 14
VIII FAQs 1. A: How do I add my AI-1001W V2/V3 to another mobile device? After setup, you can add your AI-1001W V2/V3 to the EdiGreen app on another mobile device, from any network. Tap the main menu icon on the top right and select Add New Device. If your mobile device is on the same Wi-Fi as your AI-1001W V2/V3, your AI-1001W V2/V3 will display in the Available Device List. Select it and enter the username and password.
COPYRIGHT Copyright Edimax Technology Co., Ltd. all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission from Edimax Technology Co., Ltd. Edimax Technology Co., Ltd.
Federal Communication Commission Interference Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
EU Declaration of Conformity English: This equipment is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU, 2014/35/EU. Français: Cet équipement est conforme aux exigences essentielles et autres dispositions de la directive 2014/53/EU, 2014/35/EU. Čeština: Toto zařízení je v souladu se základními požadavky a ostatními příslušnými ustanoveními směrnic 2014/53/EU, 2014/35/EU.
Declaration of Conformity We, Edimax Technology Co., Ltd., declare under our sole responsibility, that the equipment described below complies with the requirements of the European Radio Equipment directives. Equipment: Air Box Model No.: AI-1001W V2/V3 The following European standards for essential requirements have been followed: Directives 2014/53/EU Spectrum : EN 300 328 V2.1.1 (2016-11) EMC : EN 301 489-1 V2.2.0 (2017-03) EN 301 489-17 V3.2.
