User Manual

8
IV-3 Connecting AI-1001W V2/V3 to the Internet
Please make sure…
A. "Access to my location" is turned on.
B. Your mobile device is able to connect to your
home's Wi-Fi network (such as the "test" network
shown on the right) or whichever network you
anticipated the AI-1001W V2/V3 to connect to.
Please make sure this network has internet
connectivity.
1. Please plug the power adapter to a power socket and connect the
AI-1001W V2/V3 (demonstrated on the left) using the USB cable. The red
status LED will turn on.
2. Please wait a moment for the device to boot up (red status LED will stay
on during boot up). The red status LED will start flashing to indicate it is
waiting for setup. Proceed to the next step when the System Status LED
starts flashing in Red.