User Manual

1
I Installation Reminder / Safety Guide
For effective sensing and retrieval of environmental data, please install the
unit in semi-outdoor spaces with certain safety restrictions outlined below:
 Must be in locations with good air circulation.
 Must be vertically positioned for proper air intake to achieve cross
ventilation.
 The air inlet must be kept clear and should be rechecked regularly.
 Must be in locations close to a power supply and have good Wi-Fi internet
signal capable of connecting to the Internet.
 Must be in well ventilated semi-outdoor spaces such as eaves of a house,
verandah, balcony, porch, covered patios, etc..
 Must not be installed in locations that are subject to extremes of humidity
or temperature such as near fire or other heat sources.
 Must not be installed in locations that are subject to extreme weather
conditions such as typhoon, heavy rain or dust storm; or it must be
sheltered from the conditions.
 Must not be installed in locations directly exposed to sunlight or reflected
light source.
 Must not be installed in corrosive environments such as in environments
with salty, acidic or basic air, or places with storage of corrosive liquids.
 Must be placed at least 100cm above ground.
 Do not inject gas, contaminants, or smoke directly into the unit.
 It is recommended to keep a 150m distance between each unit to achieve
map positioning and air quality data accuracy.
If you wish to monitor a specific location, please also follow the restrictions
above.
If you have any questions, please contact our technical support via email:
[e-mail].