Manualshelf

User Manual

ManualsBrandsEdimax ManualsAir Quality MonitorsEdiGreen AirBox : Smart Wireless Air Quality Detector with PM2.5, Temperature and Humidity Sensors
31323334353637383940
34
Reset to Factory Default Settings
If you experience problems with the AI-1001W V2/V3, try rebooting the
AI-1001W V2/V3 by reconnecting the power. If rebooting does not work, try
resetting it back to its factory default settings. This resets all settings back to
the default settings.
1. Press and hold the reset button on the back panel for at least 10 seconds
(indicated in the picture below). Release the button when the Status LED
is turns on in Red and wait a couple of minutes for the unit to restart.
2. Please wait a moment for the
device to reset. The System Status LED will start flashing in Red if it is
ready to connect to your app and the Internet.