User Manual

3
II-2 Dust-off Canned Compressed Air
A general dust-off compressed air will be sufficient.
1. Direct the nozzle of the compressed air at an opening (Figure 5 or Figure
6) of a sensor.
2. Keep the nozzle at 10cm from the sensor opening.
3. Use short bursts (1-2 seconds) of air spray a few times to clean the
sensor.
4. Make sure all sensor openings are cleaned.
Figure 5a. AI-1001W V2
Figure 6a. AI-1001W V2
Figure 3b. AI-1001W V3 Figure 4b. AI-1001W V3