Quick Installation Guide

32
VI. Cleaning the Unit
Choose either of the two options below depending on the cleaning tool you
have. It is recommended to clean the sensors every 3-6 months for optimal
sensor functionality.
If you have other pump-like cleaning tools available (e.g. for
computers), you may also utilize them. Please be careful to not
exert extremes of force or temperature / humidity onto the
sensors to prevent damaging them.
VI-1. Air Pump Cleaner
1. Direct the nozzle of the air pump cleaner at an opening of a sensor.
2. Squeeze the bulb to blow air at the sensors.
3. Do this for 5-10 times and make sure all sensor openings are cleaned.
A general air pump cleaner of maximum diameter 55mm and
length 150mm will be sufficient.