User Manual

54
XI. Cleaning the Unit
Choose either one of the two options below depending on the cleaning tool
you have. It is recommended to clean the sensors every 3-6 months for
optimal sensor functionality.
If you have other pump-like cleaning tools available (e.g. for
computers), you may also utilize them. Please be careful to not
exert extremes of force or temperature / humidity onto the
sensors to prevent damaging them.
XI-1. Air Pump Cleaner
1. Direct the nozzle of the air pump cleaner at an opening of a sensor.
2. Squeeze the bulb to blow air at the sensors.
3. Do this for 5-10 times and make sure all sensor openings are cleaned.
AI-1001W V2 AI-1001W V2
AI-1001W V3, V4 AI-1001W V3, V4
A general air pump cleaner of maximum diameter 55mm and
length 150mm will be sufficient.