Manualshelf

User Manual

ManualsBrandsEdimax ManualsAir Quality MonitorsEdiGreen AirBox : Smart Wireless Air Quality Detector with PM2.5, Temperature and Humidity Sensors
12345678910
6
III. Hardware Installation
This section will guide you through the steps to connect your air quality
detector to the Internet.
III-1. AirBox Installation
1. Please plug the power adapter to a power socket and connect the
AI-1001W V2, V3, V4 using the USB cable. (The red status LED will turn on)
2. Please wait a moment for the device to boot up (red status LED will stay
on during boot up). The red status LED and green internet LED will start
flashing to indicate that factory default is completed. You may proceed to
the next step when factory default is completed.