User Manual

33
3. Go back to the app and tap to see all the
detectors connected to this network (exemplified on
the left).
4. Tap the unit you wish to add to your EdiGreen Home
app.
If you cannot find the desired unit, tap to
refresh the list.
5. The app will prompt you to enter the unit's
password (this is the password entered during the
unit's initial installation process). Enter the password
and tap "OK" to continue.
If you do not remember the password, you may
choose to add the unit by scanning the QR Code;
Alternatively, you may reset the unit and reconnect
it to the Internet and to your mobile device's
EdiGreen Home app.
When the process is successful, the app will bring you to the device's home
screen. Moreover, the device will be displayed on the "Device Management"
page.