User Manual

107
V-7-3. Advanced
V-7-3-1. LED Settings
The access point’s LEDs can be manually enabled or disabled according to
your preference.
Power LED
Select on or off.
Diag LED
Select on or off.
V-7-3-2. Update Firmware
The “Firmware” page allows you to update the system firmware to a more
recent version. Updated firmware versions often offer increased performance
and security, as well as bug fixes. You can download the latest firmware from
the Edimax website.
This firmware update is for an individual access point. To
update firmware for multiple access points in the AP array, go
to NMS Settings  Firmware Upgrade.
Do not switch off or disconnect the access point during a firmware
upgrade, as this could damage the device.
Update Firmware
Select “a file on your PC” to upload firmware