User Manual

7
II. Hardware Installation
II-1. Wall Mount
The APC500 includes screws to mount your controller to a wall.
Remove the rubber feet from the underside of the APC500 by
pulling gently before using the wall mount.
1. Identify and mark correct screw positions on your selected wall.
2. Attach the APC500 to your wall using the included screws, as shown in the
diagram.
3. Ensure the APC500 is fixed to the wall
firmly and oriented correctly, with the
controller’s Edimax logo as shown in the
diagram.
Ensure your controller is securely
attached to the wall.