User Manual

10
The APC500 Controller connects to a network via a switch or directly to a
router, and other connected Edimax Pro access points are automatically
designated as Managed APs. Using the APC500 you can configure, monitor
and manage all Managed APs (up to 32 connected by switches) from the
single AP Controller.
Ensure you have the latest firmware from the Edimax website for
your Edimax Pro products.
1. Connect all APs to a PoE switch which is connected to a gateway/router.
You can use your router as a DHCP server or you can later
configure your AP Controller as a DHCP server.
2. Ensure all APs are powered on and check LEDs.