User Manual

Add/Edit Access Point Group

Configure your selected access point group. Access point group settings apply

to all access points in the group, unless individually set to override group

settings.

You can use Profile Group Settings to assign the access point group to WLAN,

Guest Network, RADIUS and Access Control groups.

The Group Settings panel can be used to quickly move access points between

existing groups: select an access point and use the drop down menu or search

to select access point groups and use << and >> arrows to move APs between

groups.

Basic Group Settings

Name

Edit the access point group name.

Description

Enter a description of the access point group

for reference e.g. 2

Floor Office Group.

VLAN Group Settings

Wired LAN Port

Identifies LAN port 1 or 2.

VLAN Mode

Select “Tagged Port” or “Untagged Port” for

specified LAN interface.

VLAN ID

Set a VLAN ID for specified interface, if

“Untagged Port” is selected.

Management VLAN

VLAN ID

Check ‘Override Default Setting’ to specify the

VLAN ID of the management VLAN. Only the

hosts belonging to the same VLAN can manage

the device.