User Manual

10
5. Software Installation
The software installation procedures vary depending upon the operating system of your
PC. Be sure to follow the instructions provided for the operating system appropriate for you.
5.1 Before You Start…
The following information may be required for software installation. Contact your DSL
service provider before proceeding with software installation.
• IP Address Settings – the software installation process allows the server to dynamically
assign IP Address settings. If your application requires static setting of specific address
information you will need to know:
IP Address
Subnet Mask (for Bridged Ethernet applications only)
Default Gateway (for Bridged Ethernet applications only)
• Name Server Information – the software installation process allows the server to
dynamically assign Name Server Address settings. If your application requires static
setting of specific address information you will need to know:
Primary DNS Address
Secondary DNS Address
Primary WINS Address
Secondary WINS Address
• Type of Driver to be installed – WAN and LAN software drivers are supported.
Note: Required if not using default value
• ATM Virtual Path ID (VPI)
Note: Required if not using default value
• ATM Virtual Circuit ID (VCI)
Note: Required if not using default value
• Encapsulation type
Note: Required if not using default value
• Modulation type
Note: Required if not using default value
• User Name (for PPP applications only)
• Password (for PPP applications only)