User Manual

19
a) After you select ”Other”, the window below will appear,
PS. Please refer to the following table before you select “Typical Default WAN Setting” or
“Typical Default LAN Setting”.
Connection Type Encapsulation and Multiplexing method Network Information
WAN
PPP over ATM LLC (RFC 2364)
PPP over ATM NULL (RFC 2364)
PPP over Ethernet (RFC 2516)
Internet Account information:
z User name
z Password
LAN
Classical IP over ATM (RFC 1577)
IP over ATM Bridged LLC (RFC 2684)
IP over ATM Bridged VC (RFC 2684)
IP over ATM Routed LLC (RFC 2684)
IP over ATM Routed VC (RFC 2684)
TCP/IP information:
z IP address
z Subnet mask
z DNS
z Gateway
b) After connection type selection, the window below will appear, and then confirm
modem settings. All settings here are default, it might not correct settings for your
connection, double check settings for your ISP and go to “Accessing
Communication Settings on Windows” for the detail settings. (See Chapter 6)