User Manual

Step 5: Use the “Internet Protocol (TCP/IP) Properties” window to modify the IP

address and DNS Server addresses as follows:

• Change the IP address to a user defined address by selecting Use the following IP

address (click inside the radio button to the left of it) and typing the address in the

space provided

• Change the DNS Server addresses to user defined addresses by selecting Use

the following DNS server addresses (click inside the radio button to the left of it)

and typing the addresses in the spaces provided.

• The “Advanced” button of the “Internet Protocol (TCP/IP) Properties” window may

be used to alter DNS addresses, WINS addresses and IP security settings.

Step 6: Click OK to apply your changes and exit from the “Internet Protocol (TCP/IP)

Properties” window.

Step 7: The “

Conexant Dial-Up PPP Connection Properties” window will reappear.

Click OK to end the TCP/IP options modification session

9.1.2 Microsoft Windows 2000

TCP/IP settings are set up automatically during the software installation process. The

following procedure may be used to change TCP/IP settings, if necessary.