User Manual

46
Step 5: Click OK to apply your changes and exit from the “TCP/IP Properties”
windows.
Step 6: The “Network” window will reappear. Click OK to end the TCP/IP options
modification session.
Step 7: If you have made changes to TCP/IP properties, you will be asked to
restart/reboot your PC. Click Yes, and your PC will restart.
9.2.4 Microsoft Windows 98SE
TCP/IP settings are automatically set up during the software installation process. The
following procedure may be used to change TCP/IP settings, if necessary.
Step 1: From your PC desktop, open the “Control Panel” windows (Start Æ Settings
Æ Control). Double click the Network icon.
Step 2: Highlight TCP/IP Æ Conexant USB ADSL LAN Modem from the list of installed
network components in the “Configuration” tab of the “Network” window. Click
Properties.
Step 3: From the “IP Address” tab of the “TCP/IP Properties” window, select either
the Obtain an IP address Automatically or Specify an IP Address option, depending
on your network setup. If you select Specify an IP Address, type the IP Address and
Subnet Mask in the spaces provided. Consult with your network administrator to
determine which option best suit your individual needs.
Step 4: The “Gateway” tab allows you to add or remove gateways. Consult with your
network administrator to determine the appropriate address for your individual needs.