User Manual

30
4.2.1.3. Static IP
Parameter
Description
VPI
Virtual path identifier (VPI) is the virtual path
between two points in an ATM network. Its valid
value is in the range of 0 to 255. Enter the correct VPI
provided by your ISP. By default, VPI is set to 8.
VCI
Virtual channel identifier (VCI) is the virtual channel
between two points in an ATM network. Its valid
value is in the range of 32 to 65535. (0 to 31 is
reserved for local management of ATM traffic) Enter
the correct VCI provided by your ISP. By default, VCI
is set to 35.
Static IP Address
Enter the IP Address assigned by your ISP.
IP Subnet Mask
Enter the Subnet Mask assigned by your ISP.
Gateway
Enter the Gateway assigned by your ISP.
Connection Type
Please check with your ISP the method of