User Manual

45
Field
Description
DHCP Mode
If set to DHCP Server, the router can assign IP
addresses, IP default gateway and DNS Servers to the
host in Windows95, Windows NT and other
operation systems that support the DHCP client.
IP Pool Range
This specifies the first and the last IP address in the IP
address pool. The router assigns an IP address that is
in the IP pool range to the host.
Show Client
Click here to display the Active DHCP Client Table
which shows IP addresses assigned to clients.
Default Gateway
Enter the default gateway of the IP address pool.
Max Lease Time
The lease time determines the period that the host
retains the assigned IP addresses before the IP
addresses change.
Domain Name
Enter the domain name if you know it. If you leave
this blank, the domain name obtained by DHCP from
the ISP is used. You must enter a host name (system
name) on each individual PC. The domain name can
be assigned from the router through the DHCP server.
DNS Servers
You can configure the DNS server IP addresses for
DNS Relay.
Set VendorClass IP Range
Click here to display the Device IP Range Table. You
can configure the IP address range based on the
device type.
Click Show Client in the DHCP Mode page to display the Active DHCP Client
Table which shows IP addresses assigned to clients, as shown below: