User Manual

50
Field
Description
Address Port Translation (NAPT)
function. If you do not select it and you
want to access the Internet normally,
you must add a route on the uplink
equipment. Usually, it is enabled.
Enable IGMP
Enable or disable Internet Group
Management Protocol (IGMP)
function.
PPP Settings
User Name
Enter the correct user name for PPP
dial-up, which is provided by your ISP.
Password
Enter the correct password for PPP
dial-up, which is provided by your ISP.
Type
You can choose Continuous, Connect
on Demand or Manual.
Idle Time (min)
If set the type to Connect on Demand,
you need to enter the idle timeout
time. If the router does not detect the
flow of the user continuously, within
the preset Idle time, the router
automatically disconnects the PPPoE
connection.
WAN IP Settings
Type
You can choose Fixed IP or DHCP.
 If you select Fixed IP, enter the local
IP address, remote IP address and
subnet mask.
 If you select DHCP, the router is a
DHCP client and the WAN IP address is
assigned by the remote DHCP server.
Local IP Address
Enter the IP address of WAN interface
provided by your ISP.