User Manual

64
Field
Description
Password
The connection password provided by TR-069
service.
Debug
Show Message
Select Enable to display ACS SOAP messages on the
serial console.
CPE sends GetRPC
When enabled, the router contacts the ACS to obtain
configuration updates.
Skip MReboot
Specify whether to send an MReboot event code in
the inform message.
Delay
Specify whether to start the TR-069 program after a
short delay.
Auto-Execution
Specify whether to automatically start the TR-069
after the router is powered on.
5.5.6. ACL
Choose Service > ACL and you will arrive at the following screen. Here, you
can permit the data packets from LAN or WAN to access the router. You can
configure the IP address for Access Control List (ACL). If ACL is enabled, only
the effective IP address in the ACL can access the router.
Note: If you select Enable in ACL capability, ensure that your host IP
address is in ACL list before it takes effect.