User Manual

Field

Description

enable NTP if you want to configure the parameters

of NTP.

Server

Set the primary NTP server manually.

Server2

Set the secondary NTP server manually.

Time Zone

Choose the time zone in which area you are from

the drop down list.

5.8. Diagnostic

In the navigation bar, click Diagnostic. The Diagnostic page that is displayed

contains Ping, Traceroute, OAM Loopback, ADSL Statistics and Diag-Test.

5.8.1. Ping

Choose Diagnostic > Ping. The page shown in the following figure will appear.

Field

Description

Host

Enter the valid IP address or domain name.

PING

Click it to start to Ping.

5.8.2. Traceroute

Choose Diagnostic > Traceroute. Using this route diagnosis you can see the

route your PC data takes to another PC on the Internet.