User Manual

85
Field
Description
Host
The address of a destination host to
be diagnosed.
NumberOfTries
Repeat times.
Timeout
Timeout duration.
Datasize
Data packet size.
DSCP
A differentiated services code point
in the TOS identification byte for
service categories in the IP header of
every data packet. A DSCP prioritizes
by coding values using the used 6-bit
bytes and unused 2-bit bytes.
MaxHopCount
Maximum number of routes.
Interface
Select an interface.
Traceroute
Click to start tracing the route.
Show Result
Click to display the result.
5.8.3. OAM Loopback
Choose Diagnostic > OAM Loopback, and you will see the following page.
Connectivity verification is supported by the use of the OAM loopback
capability for both VP and VC connections. This page is used to perform the
VCC loopback function to check the connectivity of the VCC.