User Manual

User Manual
Field
Description
Password
The password provided by your ISP.
Authenticatio
n Method
You can choose AUTO, PAP or CHAP.
Connection
Type
You can choose Continuous, Connect on Demand or Manual.
Idle Time (s)
If choose Connect on Demand, you need to enter the idle timeout
time. Within the preset minutes, if the router does not detect the
flow of the user continuously, the router automatically disconnects
the PPPoE connection.
Bridge
You can select Bridged Ethernet, Bridged PPPoE or Disable Bridge.
AC-Name
The accessed equipment type.
Service-Name
The service name.
802.1q
You can select Disable or Enable. After enable it, you need to enter
the VLAN ID. The value ranges from 1 to 4095.
Apply
Changes
Click it to save the settings of this page temporarily.
Return
Click it to return to the Channel Configuration page.
Reset
Click it to refresh this page.
Source Mac
address
The MAC address you want to clone.
MAC Clone
Click it to enable the MAC Clone function with the MAC address that
is configured.
4.1.3.2. ATM Setting
Click ATM in the left pane, the page shown in the following figure appears. In this page,
you can configure the parameters of the ATM, including QoS, PCR, CDVT, SCR and MBS.