User Manual

User Manual
The following table describes the parameters of this page.
Field
Description
IP Address
Enter the IP address of LAN interface. It is recommended to use an
address from a block that is reserved for private use. This address block
is 192.168.1.1- 192.168.255.254.
Subnet
Mask
Enter the subnet mask of LAN interface. The range of subnet mask is
from 255.255.0.0-255.255.255.254.
Secondary
IP
Select it to enable the secondary LAN IP address. The two LAN IP
addresses must be in the different network.
LAN Port
You can choose the LAN interface you want to configure.
Link
Speed/Dupl
ex Mode
You can select the following modes from the drop-
downlist:100Mbps/FullDuplex,100Mbps/Half
Duplex,10Mbps/FullDuplex,10Mbps/Half Duplex and Auto Negotiation.
Modify
Select the index from Ethernet status table, and then click modify.