User Manual

User Manual
The following table describes the parameters and buttons in this page.
Field
Description
IP Address
It displays the IP address assigned to the DHCP client from the router.
MAC
Address
It displays the MAC address of the DHCP client.
Each Ethernet device has a unique MAC address. The MAC address is
assigned at the factory and it consists of six pairs of hexadecimal
character, for example, 00-A0-C5-00-02-12.
Expiry (s)
It displays the lease time. The lease time determines the period that the
host retains the assigned IP addresses before the IP addresses change.
Refresh
Click it to refresh this page.
Close
Click it to close this page.
Click Set VendorClass IP Range in the DHCP Mode page, the page as shown in the
following figure appears. In this page, you can configure the IP address range based on
the device type.
Choose None in the DHCP Mode field, and the page shown in the following figure
appears.