User Manual

User Manual
The following table describes the parameters and buttons of this page.
Field
Description
Enable
Select it to use static IP routes.
Destinat
ion
Enter the IP address of the destination device.
Subnet
Mask
Enter the subnet mask of the destination device.
Next
Hop
Enter the IP address of the next hop in the IP route to the destination device.
Metric
The metric cost for the destination.
Interfac
e
The interface for the specified route.
Add
Route
Click it to add the new static route to the Static Route Table.
Update
Select a row in the Static Route Table and modify the parameters. Then click
it to save the settings temporarily.
Delete
Selecte
d
Select a row in the Static Route Table and click it to delete the row.
Show
Routes
Click it, the IP Route Table appears. You can view a list of destination routes
commonly accessed by your network.
Static
A list of the previously configured static IP routes.