User Manual

User Manual
Field
Description
 Choose RIP1 indicates the router receives RIP v1 messages.
 Choose RIP2 indicates the router receives RIP v2 messages.
 Choose Both indicates the router receives RIP v1 and RIP v2 messages.
Send
Version
The working mode for sending RIP messages. You can choose RIP1 or
RIP2.
 Choose RIP1 indicates the router broadcasts RIP1 messages only.
 Choose RIP2 indicates the router multicasts RIP2 messages only.
Add
Click it to add the RIP interface to the Rip Configuration List.
Delete
Select a row in the Rip Configuration List and click it to delete the row.
4.2.2. NAT
4.2.2.1. DMZ
Demilitarized Zone (DMZ) is used to provide Internet services without sacrificing
unauthorized access to its local private network. Typically, the DMZ host contains devices
accessible to Internet traffic, such as web (HTTP) servers, FTP servers, SMTP (e-mail)
servers and DNS servers.
Click NAT>DMZ in the left pane, the page shown in the following figure appears.
The following describes how to configure manual DMZ.
Step 1 Select WAN Interface.
Step 1 Enter an IP address of the DMZ host.
Step 2 Click Apply Changes to save the settings of this page temporarily.