MIMO / Wireless LAN / Fast Ethernet Broadband Router Series BR-6218Mg / BR-6215SMg / BR-6215SRg BR-6304Wg / BR-6204Wg / BR-6104KP / BR-6104K Quick Installation Guide (Q.I.G.) Version 2.
0
Multi-Languages QIG on the CD =============================== Český: Českého průvodce rychlou instalací naleznete na přiloženém CD s ovladači Deutsch: Finden Sie bitte das deutsche S.A.L. beiliegend in der Treiber CD Español: Incluido en el CD el G.R.I. en Español. Français: Veuillez trouver l’français G.I.R ci-joint dans le CD Italiano: Incluso nel CD il Q.I.G. in Italiano. Magyar: A magyar telepítési útmutató megtalálható a mellékelt CD-n Nederlands: De nederlandse Q.I.G.
Copyright© by Edimax Technology Co, LTD. all rights reserved.
English Version. Getting Started Instructions for using the router to share the Internet with multiple PCs. (Power on the Modem and the Router.) Cabling installation: 1. Connect the Ethernet cable from the router’s WAN port to the LAN port of the modem. 2. Connect another Ethernet cable from the any LAN ports (1~4) on router to the Ethernet socket on the PC. 3. Check to make sure the router’s LINK LED is lit; to confirm the cable connections are made correctly.
PC LAN IP Configuration 1. Configure the PC LAN setting to automatically obtain an IP address from the router by following below steps. z z Click “Start” in the task bar then select the “Control Panel” to open it.
z z Find an icon “Network Connection” then Double-Click to open the network connection setting. You will see an icon “Local Area Connection”, click the icon then Right-Click the mouse to open the sub-menu and select the “Properties” for setting the IP.
z z Select the “Internet Protocol (TCP/IP)” then click the “Properties” Ensure the parameter marked in blue are checked in “Obtain an IP address automatically” and “Obtain DNS server address automatically” then press “OK” to close. 2. Power on sequence for the networking devices and PC. z Firstly, power off the modem followed by router and PC. z Second, power on the modem. z Third power on the router followed by PC for next step.
Router Configuration – PPPoE Note: Please do not run the PPPoE software; otherwise the Internet connection for the router may fail. 1. Enter the router’s default IP address: “192.168.2.1” into your PC’s web browser and press “enter”. 2. The login screen below will appear. Enter the “User Name” and “Password” and click “OK” to login. The default User name is “admin” and the Password is “1234”, Note: It’s highly recommended to change and save Router's log-in settings in another location.
3. The main page will appear, click “Quick Setup” Following example is for “PPPoE” WAN setting. 4. Select ‘(GMT) Greenwich Mean Time: (your country or city) then Click “Next” button.
5. Select “PPPoE xDSL”, the system will move into next step 6. Enter the “User Name” and “Password” that ISP provided and leave the others. (The “Service Name” can be blank) and click “OK” to save the setting then reboot the router 7. After reboot, your router is now ready for Internet connection.
Router Configuration - Cable Modem 1. The following example is for U.K. Click on “Quick Setup”. 2. Select ‘(GMT) Greenwich Mean Time : “London”. Click “Next” button.
3. Select “Cable Modem”, the system will move into next step 4. Enter ”Host Name” and “MAC Address”. (The “Host Name” can be blank) The MAC Address is provided by ISP (e.g. NTL) or click “Clone Mac Address” button if you’re using the computer’s MAC Address. Confirm with your ISP about MAC Address used, Click “OK” button to save the settings then reboot the router. 5. After reboot, your router is now ready for Internet connection.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Federal Communications Commission (FCC) RF Exposure Requirements SAR compliance has been established in the laptop computer(s) configurations with PCMCIA slot on the side near the center, as tested in the application for Certification, and can be used in laptop computer(s) with substantially similar physical dimensions, construction, and electrical and RF characteristics. Use in other devices such a PDAs or lappads is not authorized.
14